LT QUARTZ™ surfaces are very easy to clean and maintain. Our products require very little attention. Following these simple care and maintenance guidelines will keep your surface as beautiful as the day it was installed, throughout the years.
Cleaning LT QUARTZ™ products is simple. We recommend a sponge or damp cloth with a mild liquid soap and water for basic daily cleaning. For tougher cleanups, use a non-abrasive cleaning pad combined with mild liquid soap and water. A combination of 1/2 vinegar and 1/2 water works as well for the environmentally conscious. Once clean, rinse the surface thoroughly with clean hot water and dry with a soft cloth or paper towel.
For finger prints, metal marks, and tough food spills, apply a non-abrasive gel, such as Soft Scrub Liquid Gel with Bleach, to a damp soft cloth or sponge. Please Note – DO NOT apply gel directly onto the LT QUARTZ™ surface. Wipe in a circular motion until clean and rinse thoroughly with clean hot water and dry with soft cloth or paper towel.
Due to the high density and non-porous characteristics of LT QUARTZ™ products there is no need to seal your engineered surface. DO NOT apply any sealers, penetrants or topical treatments to LT QUARTZ™ under any circumstances. Such products will wear off and may cause the sheen to appear dull or cloudy..
DO NOT expose LT QUARTZ™ products to cleaners that may be abrasive, strong alkaline, acid, free radical or oxidized (whether high, neutral or low PH). Various chemicals are corrosive and/or erosive in their ability to attack any structure including LT QUARTZ™. Make yourself aware of the potential damages to your surface. If your LT QUARTZ™ product is exposed to any potentially damaging products, rinse immediately with clean water to attempt to offset any potential damage.
DO NOT put hot cookware directly on the LT QUARTZ™ surface. Using hot pads and trivets is always recommended, especially when using cooking units such as electric frying pans, crock pots or toaster ovens.
Finally, we recommends a thorough cleaning of your LT QUARTZ™ surface on a regular basis to insure the finish stays the same as the day it was installed.
